Welding Shield 410

Application:

The Climax 410 hand-held welding shield has been designed to provide effective protection against the radiation emitted during
welding processes, as well as against incandescent particles released during such processes. The welding shield is also
recommended for protection against the impact of low-energy, high velocity particles. Due to its design and dimensions, the shield covers the entire face and neck. The lightweight design, ergonomic handle and optical quality of the glass allow the wearer to work comfortably and without inconvenience.

Helmet shell and fastener system:

The body is made of black injection-molded polyamide with fiberglass and has a flat, rectangular front with two sides and a flat
upper surface, that forms an angle of approximately 60° with the front. The handle system consists of a closed handle joined to the
inner face of the front by means of a guide system with anchoring stops. The entire system is made of plastic

Lens:

The lens holder is fixed, consisting of a ledge in the form of a rectangular window at the front (used to hold the lens) and a rectangular frame fitted from the back and used to hold the lenses. The frame is secured by means of two metal bolts. The lens assembly is composed of a cover lens, a filter lens and a backing lens. All lenses measure 110 x 55 mm and are CE-certified.
The shield is manufactured with a standard filter lens of shade 12, although a wide range of other filter shades are also available.

Shades available : 9 – 13

Welding glass measurements : 105 x 50 mm
110 x 55 mm

Harness size : 52 – 61 cm

Weight : 415 g

Test / CE Certification:

Norms:

EN 169
EN 175: 1997